VOID Acoustics Venu 10
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
The 10" based Venu 10 has been designed to offer everything you could ask for from an installation loudspeaker. The entire Venu series has been created from the demands of many leading installation contractors and engineers around the world. Our question was simple: tell us the exact requirements that would enable us to design the ultimate installation series of loudspeakers. In response to those requirements, the Venu series was born.
There are many features that make the passive two-way Venu 10 so convenient to install and use: the Easy Hang wall bracket that support the enclosure either vertically or horizontally and requires only one set of hands to attach the enclosure; the Phoenix connector with link through makes for super quick and reliable hook ups; the rotatable 90° horizontal by 60° vertical high frequency horn allows the correct dispersion to be maintained in vertical or horizontal mounting positions; electronic high frequency protection for increased reliability; M8 flying points for horizontal ceiling suspension; weather-resistant grille and fittings suitable for beach bar and other corrosive environments; the rotatable logo to allow for correct display in either vertical or horizontal positions; and an enclosure made entirely from 15mm multi-laminate birch plywood.
Add to this the evocative Void sound from its new range of custom designed components and it's clear that Venu is the ultimate installation series.
Features:
Compact and unobtrusive appearance
Rotatable 90°H x 60°V HF waveguide
10" low frequency driver
1" high frequency compression driver
Textured polyurethane finish, optional custom colours
Multiple internal M8 rigging points
Weather-resistant perforated steel grille
Specifications:
Frequency Response 52Hz - 22kHz ±3dB
Efficiency 97dB 1w/1m
Crossover Point 2.1kHz passive
Impedance 8 ohms
Power Handling 350 Watts RMS
Maximum Output 123dB cont, 126dB peak
Driver Configuration 1 x 10" LF, 1 x 1" HF compression driver
Dispersion 90°H x 60°V rotatable
Protection HF electronic device
Connectors 1 x Phoenix with link out
Height 469mm (18.5")
Width 315mm (12.4")
Depth 250mm (9.8")
Weight 14.5kg (31.9lbs)
Enclosure 15mm birch plywood
Finish Textured polyurethane
Grille Weather-resistant perforated steel with foam filter
