Acue Lighting Focus 1

The Focus 1 LED pinspot is a battery powered single version of our popular Focus 8 LED pinspot bar. The Focus 1 was designed to streamline the pin-spotting process even more than the original Focus 8.

We used customer feedback from our Focus 8 LED pinspot bar to create an even easier solution to the dreadful pin-spotting process. With that being said, the Focus 1 features battery powered operation which will last up to 6 hrs on single charge. Setup time is now cut in half with the concept of eliminating all wires.  The Focus 1 still features wireless DMX control just like the Focus 8 and can be used in conjunction with each other as well as other wireless DMX fixtures from Acue Lighting.

For manual control we have added a remote control option which will allow control of all the Focus 1’s options using an IR remote. The Focus 1 also features manual zoom control from 2.5˚ to 35˚and is kept the same as the Focus 8 allowing for mixed use with both models at the same time.

We have also added a magnetic mounting base to the bottom of the fixture along with a 8mm clamp mount to give the Focus 1 more versatile mounting system.

The Focus 1 system comes as a package of 4 lights including a soft carrying case.





Charger Voltage AC120-220V, 50/60Hz
Power Consumption 10W
Light Source 10W Warm White LED Light Source
Beam Angle 2.5˚ to 35˚ w/ Manual Zoom Control
Battery Life Up to 6 hours on full charge
Control Modes Wireless DMX built in. Control via RF remote control or through display.
DMX Control 2Ch DMX control (dimmer & shutter)
Dimmer 0-100% Linear
Strobe/Shutter 0-20Hz

ACUE LIGHTING Focus One (Acue Lighting Focus 1 PinSpot)