Crown XTi6000

Crown XTi6000 (Crown XTI 6000)

Crown XTI6000 Power Amplifier

XTI6000
Stereo 2 Ohms = 3000 watts
Stereo 8 Ohms = 1200 watts
Bridge Mono 4 Ohms = 6000 watts

The Crown XTI-6000 Power Amplifier is a rugged and lightweight power amp that offers unmatched value in its class.
Providing up to 6,000 watts into a 4 ohm bridged load and weighing in at just 24 pounds, the XTI6000 sets a new standard in high-power, lightweight amplification.

The XTI6000 also inherits all the best features from the family line, the XTI Series, including powerful integrated speaker processing and an extremely efficient universal tracking switch-mode power supply. When you’re out with the XTI6000, you can count on having the best in music and voice reproduction with more power than ever.

Crown XTI6000 Power Amplifier Features
Integrated proprietary DSP with LCD front panel display
Accurate, uncolored and very low distortion for music and vocie reproduction
Advanced protection circuitry guards against:
Shorted outputs
Open circuits
DC
Mismatched loads
General overheating
High-frequency overloads
Internal faults
Extremely versatile, handling a wide range of speaker impedances and outputs
Switch-mode universal power supply
Speaker presets for crossover frequencies, EQ, limiting, and delay
Fits a 2U rack spaces and weigh under 24 pounds
(20% lighter than other amps)
Speakon and binding post outputs, XLR inputs and loop-thrus
Comprehensive LED status per channel

Three-Year, No-Fault, Fully Transferable Warranty protects your investment

XTI6000
Stereo 2 Ohms = 3000 watts
Stereo 8 Ohms = 1200 watts
Bridge Mono 4 Ohms = 6000 watts


Crown XTI Series Power Amplifiers
The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. XTI Series amplifiers feature an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switchmode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more.

With their powerful, reliable performance, XTI Series amps easily handle 2-ohm loads and are capable of chest-thumping lows.

Specifications:

Crown XTI6000 Power Amplifier Specifications
Output Power (1kHz Power): With 0.5% THD
2 ohm Stereo (per channel) (With 1% THD): 3,000 Watts
4 ohm Stereo (per channel): 2,100 Watts
8 ohm Stereo (per channel): 1,200 Watts
4 ohm Bridge-Mono (With 1% THD): 6,000 Watts
8 ohm Bridge-Mono: 4,200 Watts
Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz): +0/–1 dB
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)
100 dB; A-weighted
Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
Input Stage: Input is electronically balanced and employs precision 1% resistors
At Idle: Draws no more than 90 watts
Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
Input Impedance (nominal):
20 kilohms balanced
10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Stereo: 2-8 ohms
Bridge mono: 4-16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
Maximum Input Signal: +22 dBu typical
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%):
100V, 120V, 220-240V 50/60 Hz
Ventilation: Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Dimensions (WxHxD): (behind mounting surface)
19 x 3.5 x 16.2 inches (48.26 x 8.9 x 41.15 cm)
Weight: 24 pounds (10.9 kg)