LD Systems MON 12 A G3 | 12in - 127dB
$669.99
1 Video
2 Photos
Description
The MON 12 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.
For decades, 12"/1" stage monitors have been the golden mean when it comes to sonority, sound pressure and portability. With coaxial design, smart electronics and a professional look, the MON 12 A G3 brings this concept into the "modern age". The ideal dispersion geometry of 50° x 90° for monitor use or 90° x 50° for FOH use make it a multi-talent that offers the right solution for a wealth of different tasks.
Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
FEATURES:
Compact high-performance stage monitor with top-of-the-range technologies
Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
12" woofer with 2.5" voice coil
Optimised, practical radiation pattern due to 50° x 90° CD horn
DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
3-band EQ, Notch filter, 4 application presets and delay function
PowerCON compatible loop-through professional power connection
35 mm speaker stand flange for FOH applications
Durable Polyurea coating and heavy-duty front grille
SPECIFICATIONS:
General
Product type Stage monitors
Type Powered
Color Black
System output (RMS) 300 W
System output (Peak) 1200 W
Max. SPL Average (Sine burst) 120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst) 127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB) 68 - 18000 HZ
Frequency response (-10 dB) 55 - 20000 Hz
Crossover frequency 1400 Hz
Monitor angle 33°
Dispersion (H x V) 50° x 90°
Width 425 mm
Depth 453 mm
Height 315 mm
Features 3-band EQ (High, Mid, Low), Delay line, Notch filter
Weight 17,4 kg
Low/mid woofer
Low/mid Woofer dimensions 12 "
Woofer dimensions (mm) 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer type Coaxial loudspeaker
Woofer voice coil 2.5 "
Woofer voice coil (mm) 65 mm
Cabinet construction Bass Reflex
Cabinet material 15 mm Birch Plywood, 15 mm MDF
HF
Horn CD Horn
Tweeter dimensions 1 "
Tweeter dimensions (mm) 25.4 mm
Tweeter magnet Ferrite
Tweeter brand Custom-made
Tweeter voice coil 1.75 "
Tweeter voice coil (mm) 44.45 mm
Amplifier module (integrated)
Amplifier Class D
Protection circuits Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature 0 - 40 °C
Humidity Range < 80 % ( non-condensing )
Fuse T4AL 250 V
Controls On / off switch, Rotary/push encoder
Indicators LC display
Operating voltage SMPS
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 150 W
Power in / out PowerCON compatible
Line inputs 2
Line input connectors 6.3 mm jack, XLR - combo
Line thru 2
Line through connector XLR
I have one of these, I use it for a single channel monitor in my home studio sometimes hooked up to a Behringer Wing Rack, I use it for outdoor gatherings, and recreational tasks. Sounds decent, delivers a lot of volume for something that is modest in weight and size. The only thing better than this would be stuff from Adam Audio. Easy to setup and easy to use.
