Yorkville NX750P-2

Yorkvill NX-750P (Yorkville NX 750P)

NX Series
NX750P - 15 inch / 1.5 inch Active Loudspeaker

The NX750P represents the culmination of all Yorkville's research and development in molded technology to this point. The injection molded, internally multi-fin-braced enclosure supports a high-performance 15" high-powered woofer and rotatable 80º x 50º custom ABS waveguide horn, all protected by a perforated metal grill. A rugged carrying handle, speaker stand socket and reinforced threaded flypoints are also built in.
Innovative biamplified power module uses a two-tier class H linear technology to produce loud clean transients to match the high output of the woofer. The Yorkville NX750P's two-tier design technology is lower in weight and more efficient than conventional amplifiers while providing higher headroom and lower operating temperature - a perfect solution for powering the top end.

A newly designed switch-mode amplifier drives the woofer in the Yorkville NX750P. The amplifier uses Class D switching technology, in part to reduce overall weight - it also runs cooler. Class D technology is similar to the power supply found in the trend-setting Elite EF500P’s amplifier. Of particular significance is this technology’s inherently low heat production which ensures reliability in a wide range of environments. Then the Yorkville NX750P’s combination of neodymium woofer magnetics and lightweight composite enclosure materials further ensure that all this remarkable performance comes in a lightweight, durable package.

Added to this is a great degree of versatility. For example the NX750P can easily be used in any orientation – vertical or horizontal (eg stand-mounted or as a floor monitor) - close to walls in installations (flypoints are built-in) or in arrays with multiple NX750Ps. There is also a versatile direct input system and built-in mixer. The mixer allows the NX750P to be used directly with a microphone and/or a line source.

A "loop" output allows multiple NX750Ps to be interconnected with mic or patch cables and controlled by one cabinet’s mixer stage or direct line input. Here’s another versatile trick - you can combine NX750P’s using the mixer inputs on each cabinet and coupling the loop outputs to provide a complete, easy-to-use PA with its own microphone inputs and line inputs for background music or other audio. It’s ideal for duos in small clubs, also presentations or teaching applications. Many NX750P's can be linked together but a maximum of three "mixers" can be active at any one time making three mic sources and six line sources available in any three-or-more-cabinet arrays. The trim control allows looped cabinets to be individually adjusted in level. Finally, the microphone input has bass and treble equalization and a 100Hz selectable high-pass filter appropriate for vocal-only applications or to let you add NX or Elite powered subwoofers, without a crossover..

Acoustic performance is ultimately the most important factor in any loudspeaker. The NX750P offers 134dB (Peak) of maximum sound pressure potential and a wide, smooth audio range to ensure fidelity throughout the audience area.

Yorkville NX-750P Features

Integrated 1600 Watt Amplifier (Peak - 750 Watts Program)
Max SPL 133dB Peak (127dB Continuous)
Ultra-light injection molded Polypropylene construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Lightweight, high efficiency, high tech Bi-amped power module
Proven TX style processing and component protection
+6dB/-infinity input trim control for individual cabinet level adjustment
XLR and TRS inputs / outputs for easy connection and looping
Multi-input source mixer for direct inputs
Direct microphone input with level control
Two-way overall EQ controls
High quality 1.5" High Frequency driver
Rotatable 80º x 50º horn
Next generation woofer / driver / horn technology
Integrated flying hardware (1/4-20 threaded holes)
Tough, full length metal grille
Recessed Mixer panel
Made in Canada

Yorkville NX-750P Specifications

System Type 2-Way
Active or Passive Active
Program Power (Watts) 750 Watts (1600 Watts Peak)
Biampable Self Powered
Max SPL (dB) 133dB Peak (127dB Continuous)
Frequency Response (Hz +/- 3db) 50 - 26k
Crossover Frequency (Hz) 1400
Driver Configuration 15-inch / 1.5-inch
HF Driver(s) 1.5-inch Polyester voicecoil (1-inch Throat)
HF Dispersion (°H x °V) 80 x 50 rotatable
LF Driver(s) 15-inch w/ 3-inch voicecoil
HF Amplifier Type Two Tier Class H
LF Amplifier Type Class D
Power Cable Yes
Power Switch Yes
Inputs 7
Inputs - 1/4" Jacks 2 (line input) 2 (link in/out)
Inputs - XLR 1 (mic) 2 (line in/out)
Input Sensitivity (Vrms Sine) +4dBv / 1.23V
Mixer Controls Mixer on/off switch
Mic Gain
Line/CD Gain
Treble/Bass Tweak
Level Controls +6dB/-infinity Main Volume
EQ Controls 100Hz HP Filter (LF Rolloff)
Limiter Yes
LED Indicators Power/Clip/Limit
Other Controls / Features Side recesses for ease of lifting
Feet Yes
Flying Hardware 1/4-20 x 5 - 2 (Top), 2 (Bottom), 1 (Pullback)
Optional Flying Hardware NX Flyware
Bar Handles 1 (Side)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Injection molded Polypropylene
Grille Perforated Metal
Dimensions (DWH xbackW, inches) 15 x 22 x 32 x 9.5
Dimensions (DWH xbackW, cm) 38 x 56 x 84 x 24
Weight (lbs/kg) 62 / 28
* Specifications subject to change without notice
NX Series Overview

NX - Not all man made materials are created equal, acoustically speaking…
The NX Series loudspeaker cabinets have undergone a constant evolution since the flagship model, the NX20, was introduced in early 2000. Along the way, improvements in the molding process have led to the use of tougher, lightweight, low resonance variable density composite materials, use of denser foam in select locations and redesigned part geometry for a much sturdier and a much stronger molded loudspeaker box.

The NX Series cabinets now have a smoother, more rugged and more professional final finish.

All cabinets in the NX Series are molded for maximum versatility, and all boxes can be used as either a full range front of house enclosures, as floor monitors or as installation loudspeakers. Integrated flypoints, recessed handles, dent resistant all metal grilles and integrated stand mount adaptors are included on all NX Series cabinets ensuring maximum flexibility. Speakon and 1/4-inch connectors on the passive cabinets (XLR and TRS balanced connectors on the active loudspeakers) ensure simple and secure connectivity. All NX Series cabinets are UV and moisture resistant and can be used in outdoor applications.

The trapezoid box is ideal for mounting in arrays, or for use as a monitor, with recessed input jack plate and an ideal wedge monitor angle that was taken into account in the initial design. Neither application was considered as an afterthought. Stand mount and flying hardware are also available.

NX Series Characteristics

Active and Passive versions
Ultra-light variable density molded Polypropylene construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Ultra-high efficiency performance requires less power for more output
Next generation woofer / driver / horn technology
Integrated flying points
Tough, full length metal grille
Recessed input panels
 

Yorkville NX750P (Yorkville NX-750P)