American DJ Comscan LED System
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
American DJ Comscan LED System (ADJ COM-SCAN LED Sys)
Comscan LED System Includes:
• 2x Comscan LED Scanners
• 1x UC3 easy-to-use controller
• 1x DMX cable
Specifications:
• Compact & portable high performance mobile DMX scanner with an advanced high
performance LED source
• 8 gobos/colors + spot
• Gobos & Color are on the same wheel
• DMX-512 protocol (5 DMX Channels)
• 4-Button menu system LED Display making it easy to navigate
• 3 Operational modes: DMX controller, Master/Slave & Sound Active
• Exciting built-in lighting programs
• Pan/Tilt Inversion Mode: when using 4 scanners in Master/Slave Scanner 1 & 3
sync opposite Scanner 2 & 4
• Manual focusing lens
• Gobo Shake effect (via DMX Controller ONLY)
• Dimming: 0-100% (via DMX Controller ONLY)
• Strobe effect
• Beam angle: 13-degrees
• X/Y mirror movement
• Pan: 166-degree (DMX); 104-degree (Sound Active)
• Tilt: 54-degree (DMX); 40-degree (Sound Active)
• 1.8 degree Stepper motors with micro stepping
• Hanging Bracket + safety hook included
• Power consumption: 30W max
• Compatible with American DJ UC3 Series easy-to-use controllers (sold
Separately)
• Run all night - No duty cycle - Unit stay cool all night
• No cooling fan required - Very little maintenance needed
• Extreme long lifetime of the LEDs (30,000 hr. rating)
• Multi-voltage operation: AC 100V~240V 50/60Hz- IEC socket
• Dimensions (LxWxH): 13.5"x6.25"x8" / 344x160x200mm
• Weight: 8 lbs. / 3.6kg.
• ETL Approved (see user manual for more info)
If you are looking for scanners... You cant go wrong with these bad boys from ADJ. Work with every truss system. If you are using 2 of these you can mount them on a T bar other then that you can put them on a regular truss. To get a really good show out of these I would get 4 and hook them up to a controller. Not bad for the price since a few years ago I bought similar scanners for about double the price that did the same thing. If you get these you MUST MUST MUST get bags for them! Fantastic lights but the outside is plastic and will crack if you drop them. Arriba makes a good case for these. They have a side pouch for cables, clamps, etc..... I would also recommend to make sure you pick up clamps, DMX cables, and safety cables with this. Hope this helps.
