Crown XLS 402D

570W/ch @ 2 ohms, 450W/ch @ 4 ohms, 300W/ch @ 8 ohms, 1,140W bridged mono @ 4 ohms, 600W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.

Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and electronically balanced XLR inputs; touchproof binding post and Speakon outputs; all in a rugged steel chassis designed to handle serious road use.

Crown XLS 402D Power Amplifier Specifications:

• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V
• Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, 0.8dB
• Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB.
• Total Harmonic Distortion (THD): <0.5%.
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: < 0.3%.
• Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
• Crosstalk (below rated power)_at 1 kHz: 76 dB. at 20 kHz: 58 dB.
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
• Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono
• AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC
• 29.0 lbs.

Crown XLS 402D Power Amplifier Features:

• Features sophisticated protection circuitry
• 5-way fault indicator
• Red peak clip LED on each channel
• Green signal-present LED that flashes when the level is extremely low
• Detented level controls
• Mode select switch for stereo or bridged
• 3-speed fan
• Electronically balanced XLR inputs
• Touchproof binding post and Speakon outputs
• All in a rugged steel chassis designed to handle serious road use
• 3-year no-fault warranty

We carry the full line of Crown. If you need an amplifier that is not listed on our website, check here: https://www.crownaudio.com/amps.htm and call for a price.