Name: ETC D20E Dual 20A Dimmer Module 500µS
Brand: ETC
SKU: D20E Dual 20A Dimmer Module 500µS
Price: 632 USD
Availability: InStock

ETC D20E Dual 20A Dimmer Module 500µS

The Standard Dimmer Module is designed for use in both Sensor®+ and Unison® Dimming Series modular rack enclosures. Standard Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. The patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.

Applications:
Incandescent lighting
Low voltage lighting
Quartz lighting
Neon lighting
Cold Cathode lighting
2-wire Fluorescent ballast
4-wire Fluorescent ballast
FEATURES
Two 1.8 or 2.4kW dimmers per module
Standard or Enhanced risetime toroidal filters
High-density modular assembly
Die-cast aluminum chassis
Fully magnetic circuit breakers
General
100,000A Short Circuit Current Rating (SCCR)
UL and cUL LISTED

SPECIFICATIONS:

GENERAL
UL and cUL Listed for continuous duty at 100% of rated load
- D15/D15E – 1.8kW
- D20/D20E – 2.4kW
PHYSICAL
Modular plug-in assemblies
Cast aluminum chassis, finished with textured epoxy paint
Keyed to prevent insertion in inappropriately rated rack
positions
CIRCUIT BREAKERS
Fully magnetic to eliminate nuisance tripping
20x inrush current rating
125%, 10-120 seconds, must-trip rating
Rated for 100% switching duty applications
RATINGS
100,000A Short Circuit Current Rating Rating (SCCR)
Modules withstand hot-patching of cold loads up to full
rating
UL and cUL LISTED
Power Device
Sealed, patented assembly
Field replaceable with screwdriver
Two back-to-back SCRs per circuit
One control LED per circuit
4000V isolation between control and power components
Integral bonded heatsink
Integral temperature sensor
FILTERING
High quality toroidal filters
- 350μS risetime - Standard 100-120V modules*
- 500μS risetime - Enhanced 100-120V modules*
* Risetime measured at full load, at worst case firing angle (90 degrees), from 10-
90% of output wave form
DIMMER RANGE
Incandescent, low voltage dimming range 100-0%
Dimming range of 2 and 4-wire fluorescent ballast is
dependent on lamp ballast combination. Contact ETC for
range verification
Sizing of Neon transformer used in dimming applications
should be 1.5x greater than size used in non-dimming
application

E T C D20E Dual 20A Dimmer Module (500µS) (ETC D20E Dual 20A Dimmer Module-120V- 500µS)

Research with AI

Brand	ETC
Name	ETC D20E Dual 20A Dimmer Module 500µS

Build Material	Die-cast aluminum chassis

IP Rating	UL and cUL LISTED
Power Rating	2.4kW W
Wattage	2.4kW W

Warranty Length	UL and cUL Listed for continuous duty at 100% of rated load years

Why to Invest?

Provides reliable, cost-effective digital forward phase angle dimming for a wide range of lighting types with high-density modular design, fully magnetic circuit breakers to prevent nuisance tripping, and UL/cUL listing for safety and continuous duty.

How it Works?

Uses digital forward phase angle dimming with two back-to-back SCRs per circuit and toroidal filters to control power delivery to lighting loads, with integral temperature sensors and bonded heatsinks for thermal management.

What's Unique?

Patented high-density dual module design with modular installation and removal, fully magnetic circuit breakers, and options for standard or enhanced risetime toroidal filters for optimized dimming performance.

Features

Two 1.8 or 2.4kW dimmers per module, standard or enhanced risetime toroidal filters, high-density modular assembly, die-cast aluminum chassis, fully magnetic circuit breakers, 100,000A Short Circuit Current Rating (SCCR), UL and cUL LISTED.

Specifications

UL and cUL Listed for continuous duty at 100% of rated load. Modular plug-in assemblies with cast aluminum chassis finished with textured epoxy paint. Fully magnetic circuit breakers rated for 100% switching duty applications with 20x inrush current rating and 125%, 10-120 seconds must-trip rating. Sealed, patented power device assembly with two back-to-back SCRs per circuit, control LED per circuit, 4000V isolation between control and power components, integral bonded heatsink and temperature sensor. High quality toroidal filters with 350μS risetime for standard 100-120V modules and 500μS risetime for enhanced 100-120V modules. Dimming range 100-0% for incandescent and low voltage lighting; dimming range for fluorescent ballasts depends on lamp ballast combination.

Applications

Suitable for incandescent lighting, low voltage lighting, quartz lighting, neon lighting, cold cathode lighting, 2-wire fluorescent ballast, and 4-wire fluorescent ballast.

Option #1 - Affirm Financing

Order Value	Term Length	APR
$50-699.99	3, 6 or 12 Months	Interest-Bearing
$700+	3, 6 Months	0% (Qualified Customers)
$700+	3, 6, 12 or 18 Months	Interest-Bearing

-Upon Checkout, click Affirm
-Get approved in seconds
-No late fees

Option #2 - Synchrony Financing

-PREQUALIFY HERE
-Finance over 6, 9, 12 or 18 Months
-All products qualify for 6 Month 0% Interest Promo
-Some products qualify for 9, 12, or 18 Month 0% Interest Promo

Option #3 - Business Lease Financing

-CLICK HERE TO APPLY TO CIT
or
-CLICK HERE TO APPLY TO QUAIL F.S.
-For Established Businesses Only
-Lowest Rates, Flexible Payment Schedules
-Financing from $1,000 to $1,000,000
-100% Tax Deductible

Option #4 - Free Lay-Away Program

-Call 877-775-7635 to get started
-No credit checks, no late fees, no minimum order
-Pay when you can & we'll ship when it's paid off
-FREE to use ($10 initial charge is applied to final payment)

TRUSS & ACCESSORIES > Stands, Scrims & Stages > Other Accessories
Brand: ETC

Get a Quote

ETC D20E Dual 20A Dimmer Module 500µS