POWERED CONSTANT CURVATURE LINE ARRAY SPEAKER
1100W + 300W RMS 139 dB SPL
Features:
1 x 320mm (12”) B&C® high excursion LF neodymium woofer 3’’ coil and three 1” exit (1.7” voice coils) neodymium HF drivers which are coupled to three waveguide providing 100°H dispersion.
Frequency response from 60Hz-20kHz
15° vertical dispersion
Built in power amplifier, 1100W Class D for the LF and a 300W Class G for the HF.
DSP on-board provides 8 different equalization presets and 256 delay settings (0.25m to 32m), HF amplitude shading +/- 3dB
Control panel features: balanced XLR-F input/output connectors ,Gain, EQ Preset, Delay, HP filter switch, 3 status LED indicators (Power-On, Peak and Protection/Limiter)
Neutrik Powercon IN and LINK OUT AC power connectors
18mm (3/4”) baltic birch plywood cabinet finished with scratch and scuff resistant black paint, heavy duty metal grille
Ergonomically placed handles and mechanical hardware for suspension with a 10:1 safety factor are provided
QSA112A coupled to QSA112.0A cabinet permit to construct a J-array configuration and cover long distance with impressive SPL
Specifications:
Built-in amplifier LF/HF: 800/200 W RMS
Built-in amplifier peak LF/HF: 1100/300 W
Frequency response: 60Hz - 20KHz -6dB
Low frequency woofer: 12 - 3 coil - neodymium inch
High frequency driver: 3x1 - 1.7 coil - neodymium inch
Maximum SPL cont/peak: 129/139 dB
Dispersion: 100°x5° H x V
Ac power requirements: 800 VA
Power cord: 5 / 16.4 mm/inch
Net Dimension (WxHxD): 382x605x455 / 5x23.6x17.9 mm/inch
Net weight: 33.5 / 73.75 kg/lb