Matched Pair of Compact Condenser Mics for Acoustic Instruments & Overheads
The
sE Electronics sE7 (Pair) is a factory-matched set of high-performance small-diaphragm condenser microphones, perfect for stereo recording of acoustic instruments, drum overheads, piano, and ensemble miking. With a 1/2" back-electret condenser capsule, ultra-low-noise components, and discrete class-A circuitry, these mics deliver accurate, detailed sound across the full frequency spectrum.
sE Electronics sE7 (Pair) Competitive Differences
- Factory-matched pair for accurate stereo imaging
- Ultra-clean, natural sound with extremely low noise floor
- Switchable -20 dB pad for high SPL environments
- 80 Hz low-cut filter to eliminate rumble and handling noise
- Transformerless, discrete class-A circuitry for transparent performance
sE Electronics sE7 (Pair) Description
The
sE7 matched pair delivers premium sound and precision for professional and home studios alike. Each mic is voiced with a cardioid polar pattern, optimized for isolating your sound source while rejecting off-axis noise. With a wide 20 Hz – 20 kHz frequency response and SPL handling up to 156 dB (with pad), the sE7 is versatile enough for miking delicate stringed instruments or loud percussion.
sE Electronics includes both an attenuation pad and a low-cut filter on each mic, making this set flexible in a variety of acoustic environments. Built with durability and portability in mind, these mics are a top choice for mobile recording setups, live sound, and studio engineers seeking accurate stereo capture without coloration.
sE7 (Pair) Features
- Matched stereo pair for precise spatial recording
- 1/2" back-electret condenser capsules
- Cardioid polar pattern
- Frequency response: 20 Hz – 20 kHz
- Max SPL: 136 dB / 156 dB with pad
- Low-cut filter: 80 Hz, switchable
- Attenuation pad: -20 dB, switchable
- Transformerless class-A design
- Phantom powered (48V required)
sE7 (Pair) Specifications
- Electrical impedance: <200 Ohms
- Recommended load impedance: >1k Ohms
- Connectivity: 3-pin male XLR
- Sensitivity: 19 mV / Pa (-35 dBV)
- Equivalent noise level: 16 dB
- Dynamic range: 120 dB / 140 dB with pad
- Signal-to-noise ratio: 78 dB
- Current consumption: 3.0 mA per mic
- Mic diameter: 23 mm (0.91 in.)
- Mic length: 120 mm (4.72 in.)
- Mic weight: 128 g (4.52 oz.) each
What's in the Box
- 2 x sE7 microphones
- 2 x Mic clips with thread adapters
- 2 x Windscreens
sE Electronics sE7 (Pair)
(sE Electronics SE7-PAIR-U)
