sE Electronics X1A-2C WHITE/BLACK

Cardioid Condenser Microphone

The sE Electronics X1 A 2C White is a back-electret condenser microphone designed for accurate, natural recording across vocals, instruments, drums, and room applications. Its cardioid pickup pattern, wide 20 Hz to 20 kHz frequency response, switchable low-cut filter, and high SPL capability give home studios, musicians, and recording engineers a flexible microphone for a wide variety of sources.

sE Electronics X1 A 2C White Competitive Differences

• Handles up to 150 dB SPL with the switchable 20 dB attenuation pad engaged
• 100 Hz switchable low-cut filter helps reduce rumble, footfall noise, and excessive proximity effect
• Natural 20 Hz to 20 kHz frequency response supports detailed recording of vocals and instruments
• All-metal chassis provides durable construction and helps reject electrical interference and noise
• Integrated windscreen helps control unwanted air movement and plosives
• Gold-plated 3-pin XLR connector supports a reliable signal connection
• Distinctive white-and-black finish provides a modern studio appearance

sE Electronics X1 A 2C White Description

The sE Electronics X1 A 2C White combines versatile condenser microphone performance with a distinctive white-and-black finish. Its 2/3-inch back-electret condenser capsule uses a cardioid polar pattern to focus pickup toward the front of the microphone while providing a balanced sensitivity of 20 mV/Pa.

For loud sources, the switchable 20 dB attenuation pad increases maximum SPL handling from 130 dB to 150 dB. This makes the microphone suitable not only for vocals and acoustic instruments, but also for high-level sources such as drum kits, electric guitar cabinets, brass, and other close-miking applications.

A switchable 100 Hz low-cut filter with a 6 dB/octave slope helps reduce unwanted low-frequency rumble and excessive bass caused by close microphone positioning. The microphone's 20 Hz to 20 kHz frequency range also makes it useful for overheads, room recording, piano, orchestral instruments, strings, woodwinds, and acoustic guitar.

The durable all-metal housing is built for regular studio use and helps shield the microphone from electrical interference. An integrated windscreen and gold-plated XLR connector add practical protection and dependable connectivity, while 48V phantom power provides compatibility with standard professional microphone preamps, mixers, and audio interfaces.

X1 A 2C White Features

• 2/3-inch back-electret condenser capsule
• Cardioid polar pattern
• 20 Hz to 20 kHz frequency response
• Maximum SPL of 130 dB without attenuation
• Maximum SPL of 150 dB with 20 dB attenuation pad engaged
• Switchable 20 dB attenuation pad
• Switchable 100 Hz low-cut filter with 6 dB/octave slope
• 20 mV/Pa sensitivity
• 16 dB equivalent noise level
• All-metal microphone housing
• Integrated windscreen
• Gold-plated 3-pin male XLR connector
• 48V phantom powered
• White-and-black finish
• Suitable for vocals, drum kits, overheads, room recording, acoustic guitar, electric guitar cabinets, orchestral instruments, strings, piano, woodwinds, and brass

X1 A 2C White Specifications

• Capsule: 2/3-inch back-electret condenser
• Polar Pattern: Cardioid
• Frequency Range: 20 Hz - 20 kHz
• Sensitivity: 20 mV/Pa (-34 dBV)
• Max SPL: 130 dB / 150 dB with 20 dB pad (0.5% THD at 1 kHz)
• Equivalent Noise Level: 16 dB
• Dynamic Range: 114 dB / 134 dB with 20 dB attenuation pad
• Signal-to-Noise Ratio: 78 dB
• Low-Cut Filter: 100 Hz, 6 dB/octave, switchable
• Attenuation Pad: 20 dB, switchable
• Electrical Impedance: Less than 50 ohms
• Recommended Load Impedance: Greater than 1 kohm
• Connectivity: 3-pin male XLR connector
• Powering: 48V phantom power (P48 according to IEC 61938)
• Current Consumption: 4.0 mA
• Microphone Diameter: 2.28 in (58 mm)
• Microphone Length: 6.65 in (169 mm)
• Weight: 13.76 oz (390 g)

What's In The Box

• X1 A microphone
• Swivel microphone clip
• Microphone stand thread adapter

sE Electronics X1A-2CWB (sE Electronics X1A2CWB)