Control Module & Display for Floor Fog Cooler
Smoke Factory SF-39196 is the GPU‑and‑display assembly replacement part for Carpet Crawler CO₂‑based fog cooler systems. It provides the user interface, control logic, and display functionality needed to operate and configure the cooler’s settings, including DMX/ArtNet addressing, output control, timer modes, and fog/air adjustments.
Smoke Factory SF-39196 Competitive Differences
- Complete control module with integrated display — ensures correct interface compatibility with Carpet Crawler units
- Restores all user‑configurable functions (DMX, analog remote, CO₂ output levels, air supply, timer, and profiles) when original GPU/display fails
Smoke Factory SF-39196 Description
The Carpet Crawler cooler relies on a built‑in display and control electronics to manage its CO₂ fog cooling, air supply, fog density, DMX/ArtNet addressing, and other user settings. According to the official product description, “all functions can be controlled via DMX or via the touch display on the device.” :contentReference[oaicite:2]{index=2}
If the original display or control board malfunctions — for example, due to damage, faulty wiring, or component failure — the Carpet Crawler loses critical control capabilities: the operator may no longer be able to set fog/air output, change DMX or remote settings, or trigger fogging correctly. By installing the SF‑39196 module, you restore full control functionality and ensure the unit behaves as intended.
This makes SF‑39196 an essential spare or maintenance part for rental rigs, touring trucks, or installations where downtime must be minimized. Instead of replacing the entire cooler, you can replace just the control module — saving cost and simplifying logistics, while keeping the cooler’s original behavior, interfaces, and settings structure intact.
Model Features
- Replacement GPU / control board with integrated display for Carpet Crawler cooler
- Restores full control over CO₂ fog output, air supply, DMX/ArtNet, analog remote or timer modes, and profiles
- Compatible with all standard Carpet Crawler configurations (solo cooler, case version, or touring combo) :contentReference[oaicite:3]{index=3}
- Facilitates simple replacement — plug‑in module swap without major rewiring (assuming original harness intact)
Model Specifications
- Part Number: SF‑39196
- Compatible With: Carpet Crawler CO₂ fog cooler units by Smoke Factory :contentReference[oaicite:4]{index=4}
- Function: GPU / control board + user display — manages cooler operation, user interface, and control signal processing
What’s In The Box
*(typical replacement kit)*
- GPU / display module (SF‑39196)
- Mounting hardware or bracket (if the original requires replacement)
- Connector harness or board mounting interface (assuming original wiring harness is intact)
Smoke Factory SF-39196
(Smoke Factory SF39196)
