Trusst Glo Totem 2.0
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
Glo Totem 2.0
Features
• All-in-one Glo Totem kit for the mobile entertainer
• Includes 4 tubes, top and bottom plates, scrim, carry bag for tubes, and all connecting hardware
• Made of lightweight aluminum for easy transportation, setup, and breakdown
• Assembles with the same conical connection system as other TRUSST® products
• No screws or hex keys to lose for stress-free assembly
• Additional bolt holes on top plate for secure attachment of lighting fixtures
• Built-in carrying handles in the bases make transportation a breeze
• Scrim is manufactured with certified fire retardant material
Product Description
Glo Totem 2.0 is an all-in-one kit for the mobile entertainer. The 2 m tall system includes 4 tubes, top and bottom plates, fire retardant scrim, carry bag for tubes, and all connecting hardware. Made of lightweight aluminum for easy transportation, setup, and breakdown, it assembles with the same conical connection system as other TRUSST® products.
Stress free assembly with no screws or tools to lose, additional mounting holes for lighting fixtures, and convenient integrated carrying handles in the bases make this a perfect addition to your rig.
For added versatility, check out our Totem Speaker Stand Adaptor, this accessory allows you to mount a speaker safely on top of a totem. The adaptor attaches quickly to the center hole in the top plate without tools.
Specifications
• Length: 6.56 ft (2.0 m)
• Outer diameter tube: 2 in (50 mm)
• Size (Top Plate): 12 x 12 in (300 x 300 mm)
• Size (Base Plate): 24 x 24 in (600 x 600 mm)
• Base plate thickness: 0.23 in (6 mm)
• Tube wall thickness: 0.08 in (2 mm)
• Weight: 39.4 lb (17.8 kg)
I have two of these and I have been very happy with them. They do what I need and don't break my back (or my bank!) There are several applications these can be used for. If your venue has tall ceilings, they area great platform to put your moving heads on top of. If the venue has low ceilings, you're probably better off just using a T bar, but adding these to your inventory gives you options! You can also stage them on either side of a doorway to create an impactful entrance to any event.<br /> <br /> They are big enough for pretty much all par cans. I use an ADJ Ultra Go Par 7X in each of mine and they fit great. I also have some Puck 3's from Blizzard lighting and they just barely fit (you have to take off the yokes, though).<br /> <br /> The carrying handles are very nice and don't cut into your hands. The rounded edges on the base plates create a nice look and don't scrape up the floor. They are also very lightweight. Chauvet recommends using sandbags for safety, but I think they'll be fine under most circumstances. If somebody pile drives into it they're going to fall over with or without sandbags.<br /> <br /> The truss pins and cotter pins are the only downside. The cotter pins don't lock at all, they slide on but there is NO tension to keep them from sliding out. The truss pins fit almost every hole without needing a hammer, which is nice, but doesn't create the most solid structure. However, when you have the tight scrim covering all the pins there's no way that they'll vibrate out and fall apart. <br /> <br /> I like the carrying bags that it comes with and everything can fit inside. However, I wish the carrying bag had a small pocket for the hardware. Nobody wants all their pins rolling around in the main bag. I just keep them in a separate bag.<br /> <br /> Overall this is a great product at a reasonable cost. They help elevate your look and add versatility to your setup.
