AKG C900M
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
*Discontinued
AKG C900M Handheld Condenser Microphone
AKG C 900M
This professional condenser vocal microphone will make your voice cut through
the loudest mix - on any stage. It has been optimized for use with in-ear
monitor systems and provides a cardioid polar pattern for high gain before
feedback. The C 900M is available with one of two output modules: XLR connector
module for use with a standard microphone cable. TM 40 transmitter module for
wireless use. Easy changeover from hardwire to wireless operation does not only
increase your range of action but also ensures perfect mobility.
Overview
The award-winning C 900M is a professional condenser vocal microphone whose
sound will help your voice cut through the loudest mix on any stage. Its modular
output section gives you the choice of wired or wireless operation by simply
adding the optional TM 40 UHF module and WMS 40 receiver. The C 900M's
frequency-independent cardioid pattern has been carefully tailored for
exceptional gain-before-feedback. The back electrode of the transducer uses a
metal foil stamped onto a perfectly flat electret material made of a special
conductive plastic to further enhance the excellent acoustic performance. The
gold-encapsulated transducer is very resistant to humidity and moisture too.
Comes complete with SA 61 unbreakable stand adapter and carrying case. The C
900M includes the PB 1000 presence boost adaptor to add 3 to 5 dB of emphasis in
the 5 - 9 kHz range that improves transient detail and intelligibility.
Polar pattern Cardioid
Frequency range 20 20.000 Hz
Sensitivity 6 mV/Pa (-44 dBV re 1 V/Pa)
Max. SPL 139/142 dB SPL (THD = 1% / 3%)
Equivalent noise level 17,5 dB (A) to DIN 45412
Impedance <= 200 Ohms
Recommended load impedance >= 2.000 Ohms
Connector 3-pin male XLR
Finish Matte black enamel
Dimensions Length: 180 mm (7.1 in.); :50 mm (2.0 in.)
Net weight 295g (10.4 oz.)
Patent(s) Electrode for condenser transducers (Patent no. AT 385.386, US
4.790.021)
Electrode support for condenser transducer (Patent no. AT 392.182, DE 4.021.661)
