B52 Matrix 1000 V2 + Cables

B-52 Matrix 1000 V2 w/ (2) 25ft Speakon Cables

700-watt RMS Active Speaker System - 15" Subwoofer and 2x10" Satellites
The MATRIX-1000 V2 is a complete sound reinforcement solution comprising of two 10” two-way satellites, a dedicated 15” subwoofer and a built-in three-channel 700-watt power amplifier. The three-channel amplifier features three distinct volume controls, electronic crossover with equalization and a VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you’re ready to go!

Suggested Applications
Mobile DJ • Karaoke • Nightclub, Restaurant, Bar Installation • Corporate Audio / Video n Home Entertainment System • Live Sound System • Stage Monitoring System • Booth Monitoring System n Drum Monitoring

V2 Upgrades: The Best Gets Better
• A new high-performance compression driver for a smoother frequency 
response and lower distortion throughout the upper midrange frequencies. 
• A new elliptical wave guide with more uniform dispersion. 
• The addition of a voltage controlled amplifier (VCA) on all three amplifier channels to minimize the effects of amplifier clipping. This lowers the maximum distortion produced at VERY high drive levels and offers additional 
protection for the speaker components. 
• More durable FREE dust cover.
• Improved B-52 handles.

10” Two-Way SatellitesPole Mountable, Flyable Or Angled For Use As Stage Monitors
The MATRIX-1000 V2 satellites are loaded with a custom designed 10” speaker and 1” titanium diaphragm compression driver. The “horn” is a 900 by 600 elliptical waveguide that can be rotated 900 to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also
include 3/8” – 16tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000 V2 in and out of a venue in record time.

Stack, Rock and Roll
To transport the MATRIX-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer’s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you’re ready to move the MATRIX-1000 V2 with ease.

Built-in 700-watt three-channel amplifier
The 15” subwoofer enclosure has two separate compartments. The front chamber serves as the cabinet for the custom B-52 15” subwoofer. The rear chamber houses all of the MATRIX-1000 V2’s electronic circuitry. This includes a 400-watt amplifier for the subwoofer, 2 x 150-watt amplifiers for the satellites, electronic crossover, VCA compressor, electronic equalization, pre-amp and power supply.

B-52 MATRIX-1000 V2 700W Active 3-Piece Speaker System Specifications:

700-WATT 3-CHANNEL AMPLIFIER
Subwoofer Power Output: 400 W
10" Two-way Power Output: 150 W
Line in: XLR Female
Parallel out: XLR Male
Input Impedance: 48 k Ohms
Speaker Out: Speakon NL4 Style Connector
Power Requirement: 115V<>50/60Hz<>10A, 230V<>50/60Hz<>6A

15" SUBWOOFER
Speaker: 15" Custom Built B-52 Subwoofer
Nominal Impedance: 8 Ohms
Subwoofer Freq. Response: 40 Hz; 120 Hz +/- 3dB
Sound Pressure Level (1w/1m): 102 dB (half space)
Max. SPL: 127 dB @1% THD
Weight: 120 lbs
Dimensions (Transport): 28" (H) x 19" (W) x 23" (D)

10" TWO-WAY SPEAKERs
Speaker Input: Speakon style connector, (pin 1+ = +, pin 1- = -)
LF/MF Woofer: 10" Custom Built B-52 Transducer
HF Driver: 1" Titanium Diaphragm
HF Dispersion: 90 x 60
Nominal Impedance: 4 Ohms
Active Freq. Response: 120—19K Hz +/- 3dB
Crossover Frequency (passive): 2.5 kHz; 12 dB / Octave
Sound Pressure Level (1w/1m): 101 dB (half space)
Max. SPL: 124 dB @10% THD
Weight: 30 lbs
Dimensions (Upright): 19" (H) x 12" (W) x 11" (D)

COMPLETE SYSTEM
Weight: 180 lbs
Dimensions (Transport): 39" (H) x 19" (W) x 23" (D)

Add on the B-52 Smart Kit

(2) Speaker Stands (4) Cables (1) Carrying Bag - $129.99