JBL PRX635
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
JBL PRX-635
The PRX600 Series represent an evolutionary step in the efficient use of
amplifier power, rugged durability and enhanced versatility in a self-powered
loudspeaker. Designed from the ground up to perform in the real world of sound
reinforcement where challenging audio environments, high ambient noise levels
and loud volumes are the norm, the PRX600 Series are built to last a lifetime
using our reliable and trustworthy, tour-tested technology. Knowing you can rely
on your system to deliver everything you need gives you the freedom to deliver
your best. That’s performance you can trust.
The PRX635 is a self-powered, lightweight three-way loudspeaker system capable
of delivering a very high level of performance over a broad bandwidth.
Features:
Maximum SPL 135 db peak
380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium
woofer
165mm (6.5 in) horn loaded midrange transducer
25.4mm (1 in) polymer diaphragm compression driver
1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifier
DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic
limiting, component optimization, selectable system EQ
Professional XLR line and ¼" Mic/Instrument inputs, with loop through
Obsidian DuraFlex™ coated plywood construction
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for
maximum comfort
8 M10 Suspension points and 1 pullback point
Integrated 36mm pole mount socket
System Type:Self-powered 15",three - way, bass - reflex
Maximum SPL Output:135 dB peak
Frequency Range (-10 dB):Flat: 41 – 19 kHz Boost: 40 – 19 kHz
Frequency Response (±3 dB): Flat: 53 – 18 kHz Boost: 50 – 18 kHz
Coverage Pattern:90º x 50º nominal
Amp Design:Crown® Class D
Power Rating:1500 W ( 3 x 500 )
Dimension (H x W x D)36.29 in x 16.71 in x 16.27 in
Net Weight:60 lb
Applications :
This speaker is ideally suited to applications where the program material
exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity
full range sound without a subwoofer, when coupled with extended low frequencies
of the PRX618S-XLF, one experiences complete control over the entire audio
spectrum. These cabinets can be stand-mounted but do require a large footprint
tri-pod type stand. When pole mounting the PRX635 on a subwoofer we highly
recommend a pole no longer than 24” (SS3BK-24 or SS4BK-24) to ensure stability
and safety. As with all the full-range PRX600 Series systems two EQ selections
can be used to optimize the system for the program material and/or environment.
The input section also accommodates either Line or Mic/Instrument level inputs.
The PRX635 is a self-powered, lightweight three-way loudspeaker system capable
of delivering a very high level of performance over a broad bandwidth. The
PRX635 is comprised of one 380 mm (15 in) 265F Differential Drive® woofer, a 165
mm (6.5 in) 195H horn-loaded 90° by 50° mid-range and a 2414H 25.4 mm (1 in)
annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50°
horn, all driven by a 1500 watt (3 x 500) Audio Class-D power amplifier. A
propriety DSP chip is at the core of a fully featured input section, providing
user selectable system EQ, protection, input sensitivity selection, cross-over
functionality, dynamic limiting and discrete component optimization.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a
sensitivity switch provides extra flexibility, making it possible to connect
literally any sound source without using a mixer. Signal present and overload
lights indicate the system status and assist in setting the optimum level, via
the level control knob.
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom
for added rigidity) and 18mm, strong, light-weight poplar plywood made
structurally sound with tongue and groove joints. All PRX600 Series cabinets are
protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from
dent-resistant 16 gauge steel and handles are made from light-weight
glass-filled nylon for added strength and durability. All M10 suspension points
are constructed from 14 gauge steel and have been tested with a yield-strength
of 1000 lbs. each.
