Chauvet DJ SlimPAR 38
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
Chauvet SlimPAR 38 (Chauvet PAR 38)
It’s an LED PAR 38 with a slim casing—only 2.5 inches thick—that can go almost anywhere. Boasting 75 red, green and blue LEDs, the fixture offers 3- or 7-channel of DMX control. Or you can use its built-in automated and sound-activated programs and variable speed-pulse effect for use on the fly. The Chauvet SlimPAR 38 also offers static colors and RGB color mixing with or without DMX and built-in power linking for quick set up and break down.
3 or 7-channel DMX-512 slim LED PAR can
Operating modes:
3-channel: RGB control
7-channel: RGB, macros, run/strobe speed, automatic/sound, dimmer
Static colors and RGB color mixing with or without DMX controller
Built-in automated programs via master/slave or DMX with variable speed
Built-in sound activated programs via master/slave or DMX
Pulse effect with adjustable speed
Low-profile lights are 2.5in deep
Power linking: max 43 units @ 120V (see manual for details)
Double-bracket yoke doubles as floor stand
Beam angle: 17°
Field angle: 29°
Lux: 1,500 @ 1m
Light Source: 75 (25 red, 25 green, 25 blue) LEDs
Power and current: 120V, 60Hz: 9W, 0.1A operating, 0.2A inrush
AC power: Autoswitching 100V-240V 50/60Hz
Weight: 1.8lbs (0.8kg)
Size: 7.3in x 8.1in x 2.5in / 185mm x 206mm x 64mm
I own 10 of these (Slimpar 38) and I think they are adequate. I design professionally for theater and dance. These work ok for accent side light, however they are a little underpowered for much else. If you wish to use this type of fixture for any kind of primary source I would recommend stepping up to the Slimpar 56 or 64. For accent light these work just fine though. The built in features are nice and and the power/DMX pass through is very very nice. If you are looking to video your productions I would not really recommend these or any of the Chauvet Slim series, step up to the Pro series as the frequency of this particular series will cause flicker on the recording. Hope this helps you all.
I own quite a few of these units and I have nothing but good things to say about them. They have been more than sufficient for any up-lighting jobs I have done. There are very easy to use and setup and yet compact enough to put just about anywhere. The price on these is great, making them a win win all around.
Nice lights. I used them for truss warmers and they worked well. No visible flicker on video either.
