JBL PRX612M
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
JBL PRX-612 M
The PRX600 Series represent an evolutionary step in the efficient use of
amplifier power, rugged durability and enhanced versatility in a self-powered
loudspeaker. Designed from the ground up to perform in the real world of sound
reinforcement where challenging audio environments, high ambient noise levels
and loud volumes are the norm, the PRX600 Series are built to last a lifetime
using our reliable and trustworthy, tour-tested technology. Knowing you can rely
on your system to deliver everything you need gives you the freedom to deliver
your best. That’s performance you can trust.
PRX612M is the most compact and versatile speaker in the PRX600 Series. It has
been designed to deliver maximum performance for its weight and size as both a
stage monitor and a front of house main PA.
FEATURES:
Maximum SPL 134db peak
Dual purpose enclosure for both front-of house and floor monitor applications
Eight M10 fly points for horizontal or vertical suspension. One M10 pull-back
point
Optimized EQ for monitor or front-of-house applications
305mm (12 in) Differential Drive® dual voice-coil and magnetic gap, neodymium
woofer
37.5mm (1.5 in) annular polymer diaphragm, neodymium, compression driver
1000 Watt (Dual 500 watt) Class-D, Crown® amplifier
DSP input section, crossover, dynamic limiting, component optimization,
selectable system EQ
Professional XLR line and ¼" Mic/Instrument inputs, with loop through
Dual-angle pole mount socket
System Type : Self-powered 12", two-way, bass-reflex
Maximum SPL Output : Full Range: 134 dB peak Monitor: 133 dB peak
Frequency Range (-10 dB) : Full Range: 50 – 20 kHz Monitor: 51 – 20 kHz
Frequency Response (±3 dB) : Full Range: 60 – 17.5 kHz Monitor: 61 – 18.5 kHz
Coverage Pattern : 90º x 50º nominal
Amp Design : Crown® Class D
Power Rating : 1000 W ( 2 x 500 )
Dimension (H x W x D): 23.3 in x 13.9 in x 13.4 in
Net Weight : 15.6 kg ( 34.5 lb )
Applications :
PRX612M is the most compact and versatile speaker in the PRX600 Series. It has
been designed to deliver maximum performance for its weight and size as both a
stage monitor and a front of house main PA. Two user selectable EQ settings are
provided to optimize the system for either application. With a dual socket pole
mount the PRX612M is a perfect match with a PRX618S subwoofer, offering a high
performance self-powered sub/sat system.
The PRX612M is comprised of a 305 mm (12in) 265F Differential Drive® woofer, a
2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression
driver mounted to a 90° by 50° horn, all driven by 1000 watt (dual 500 watt)
Crown® Class-D digital power amplifier. A propriety DSP chip is at the core of a
fully featured input section, providing user selectable system EQ, protection,
input sensitivity selection, cross-over functionality, dynamic limiting and
discrete component optimization.
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom
for added rigidity) and 18mm, strong, light-weight poplar plywood made
structurally sound with tongue and groove joints. All PRX600 Series cabinets are
protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from
dent-resistant 16 gauge steel and handles are made from light-weight
glass-filled nylon for added strength and durability. All M10 suspension points
are constructed from 14 gauge steel and have been tested with a yield-strength
of 1000 lbs. each.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a
sensitivity switch provides extra flexibility, making it possible to connect
literally any sound source without using a mixer. Signal present and limiter
lights indicate the system status and assist in setting the optimum level, via
the level control knob.
