JBL PRX625
DISCONTINUED
This product has been discontinued by the manufacturer. Please contact us to find a replacement.
JBL PRX-625
The PRX600 Series represent an evolutionary step in the efficient use of
amplifier power, rugged durability and enhanced versatility in a self-powered
loudspeaker. Designed from the ground up to perform in the real world of sound
reinforcement where challenging audio environments, high ambient noise levels
and loud volumes are the norm, the PRX600 Series are built to last a lifetime
using our reliable and trustworthy, tour-tested technology. Knowing you can rely
on your system to deliver everything you need gives you the freedom to deliver
your best. That’s performance you can trust.
The PRX625 is a self-powered, lightweight two-way loudspeaker system capable of
delivering a very high level of performance over a broad bandwidth.
Features:
Maximum SPL Output 135db peak
2 x 380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap,
neodymium woofers
37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver
1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifier
DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic
limiting, component optimization, selectable system EQ
Professional XLR line and ¼" Mic/Instrument inputs, with loop through
Obsidian DuraFlexâ„¢ coated plywood construction
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for
maximum comfort
8 M10 Suspension points and 1 pullback point
System Type: Self-powered dual 15", two - way, bass - reflex
Maximum SPL Output:139 dB peak
Frequency Range (-10 dB): Flat: 40 – 19.5 kHz Boost: 39 – 19.5 kHz
Frequency Response (±3 dB): Flat: 55 – 17.5 kHz Boost: 50 – 18 kHz
Coverage Pattern:90º x 50º nominal
Amp Design:Crown® Class D
Power Rating:1500 W ( 3 x 500 )
Dimension (H x W x D):41.47 in x 16.71 in x 16.27 in
Net Weight:60 lb
Applications :
If a simple set-up is required and full bandwidth output at high levels is a
must, then the PRX625 is most likely the optimum solution. With the same foot
print as the PRX515M, the dual 15" woofer design creates enough low frequency
content to serve most live music or music playback situations. When coupled with
a PRX subwoofer (or multiple subwoofers) the system becomes a high volume sound
reinforcement solution, perfect for regional tour companies and AV Rental
companies looking for a scalable, easy to employ audio solution. We recommend
using the PRX618S-XLF in conjunction with the PRX625 as the extended low
frequency capabilities of the subwoofer compliment the frequency response of the
PRX625.
For live music, recorded music playback and speech the user has the option of
tailoring the EQ, 'flat' for speech intelligibility and 'boost' for enhanced
bass and crisp highs in recorded music playback. A microphone can be directly
connected to the speaker input for quick on-the-fly PA applications.
The PRX625 is a self-powered, lightweight two-way loudspeaker system capable of
delivering a very high level of performance over a broad bandwidth. The PRX625
is comprised of two 380 mm (15 in) 265F Differential Drive® woofers, a 2408H-1,
37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted
to a 90° by 50° horn, all driven by a multi-channel Crown® Class-D power
amplifier. A propriety DSP chip is at the core of a fully featured input
section, providing user selectable system EQ, protection, input sensitivity
selection, cross-over functionality, dynamic limiting and discrete component
optimization.
The amplifier input panel offers XLR or ¼ inch jack compatibility and a
sensitivity switch provides extra flexibility, making it possible to connect
literally any sound source without using a mixer. Signal present and overload
lights indicate the system status and assist in setting the optimum level, via
the level control knob.
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom
for added rigidity) and 18mm, strong, light-weight poplar plywood made
structurally sound with tongue and groove joints. All PRX600 Series cabinets are
protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from
dent-resistant 16 gauge steel and handles are made from light-weight
glass-filled nylon for added strength and durability. All M10 suspension points
are constructed from 14 gauge steel and have been tested with a yield-strength
of 1000 lbs. each.
